All IPs > Analog & Mixed Signal > Analog Front Ends
Analog Front Ends (AFEs) are integral components in modern electronic design, bridging the gap between analog signals from the outside world and the digital systems that process these signals. At Silicon Hub, our semiconductor IPs in the Analog Front Ends category are engineered to ensure high fidelity and efficiency in transferring signals with minimal loss or distortion. These components are crucial in a variety of applications, from telecommunications to medical devices, where precise signal interpretation is paramount.
Analog Front Ends serve as the initial interface in communication systems, sensor networks, and various digital processing environments. They typically include amplifiers, filters, and converters designed to condition incoming analog signals for further digital processing. This conditioning is vital for achieving accurate, high-quality data capture, allowing downstream digital processors to work more effectively. Whether dealing with audio signals, video inputs, or complex sensor data, AFEs ensure the integrity of the analog portion of the signal chain.
In the realm of telecommunications, Analog Front Ends are employed to refine and equalize signals received from mobile networks, satellites, or optical fibers, ensuring clear and reliable communication. In consumer electronics, they are crucial in devices like smartphones and televisions, where high-resolution signal conversion and processing are required to maintain performance standards. Analog Front Ends also find applications in medical instrumentation, where they play a role in sensitive equipment such as ECGs and MRIs by enabling accurate physiological data collection and analysis.
Our collection at Silicon Hub features a variety of Analog Front Ends semiconductor IPs designed to meet the most demanding industry standards. We offer solutions that provide scalability, cost-effectiveness, and power efficiency, essential for both emerging technologies and traditional systems. By integrating these AFEs into your projects, you can ensure your devices are equipped to handle the challenges of modern signal processing, ultimately enhancing your products' capabilities and competitiveness in the market. Explore our range to find the perfect match for your design needs.
The Mixel MIPI C-PHY IP (MXL-CPHY) is a high-frequency, low-power, low cost, physical layer. (Learn more about Mixel’s MIPI ecosystem at Mixel MIPI Central which gives you access to Mixel’s best of class MIPI ecosystem supply chain partners.) The C-PHY configuration consists of up to three lane modules and is based on 3-Phase symbol encoding technology, delivering 2.28 bits per symbol over three-wire trios and targeting a maximum rate of 2.5 Gsps, 5.7Gbps. The C-PHY is partitioned into a digital module – CIL (Control and Interface Logic) and a mixed-signal module. The PHY IP is provided as a combination of soft IP views (RTL, and STA Constraints) for the digital module, and hard IP views (GDSII/CDL/LEF/LIB) for the mixed-signal module. This unique offering of both soft and hard IP permits architectural design flexibility and seamless implementation in customer-specific design flow. The CIL module interfaces with the protocol layer and determines the global operation of the module. The interface between the PHY and the protocol is using the PHY-Protocol Interface (PPI). The mixed-signal module includes high-speed signaling mode for fast-data traffic and low-power signaling mode for control purposes. During normal operation, a lane switches between low-power and high-speed mode. Bidirectional lanes can also switch communication direction. The change of operating mode or direction requires enabling and disabling of certain electrical functions. These enable and disable events do not cause glitches on the lines that would result in a detection of incorrect signal levels. All mode and direction changes are smooth to always ensure a proper detection of the line signals. Mixel’s C-PHY is a complete PHY, silicon-proven at multiple foundries and multiple nodes. It is built to support the MIPI Camera Serial Interface (CSI) and Display Serial Interface (DSI).
The Mixel MIPI C/D-PHY combo IP (MXL-CPHY-DPHY) is a high-frequency low-power, low cost, physical layer compliant with the MIPI® Alliance Standard for C-PHY and D-PHY. (Learn more about Mixel’s MIPI ecosystem at Mixel MIPI Central which gives you access to Mixel’s best of class MIPI ecosystem supply chain partners.) The PHY can be configured as a MIPI Master or MIPI Slave, supporting camera interface CSI-2 v1.2 or display interface DSI v1.3 applications in the D-PHY mode. It also supports camera interface CSI-2 v1.3 and display interface DSI-2 v1.0 applications in the C-PHY mode. The high-speed signals have a low voltage swing, while low-power signals have large swing. High-Speed functions are used for high-speed data traffic while low-power functions are mostly used for control. The C-PHY is based on 3-Phase symbol encoding technology, delivering 2.28 bits per symbol over three-wire trios, operating with a symbol rate range of 80 to 4500 Msps per lane, which is the equivalent of about 182.8 to 10260 Mbps per lane. The D-PHY supports a bit rate range of 80 to 1500 Mbps per Lane without deskew calibration, and up to 4500 Mbps with deskew calibration. The low-power mode and escape mode are the same in both the D-PHY and C-PHY modes. To minimize EMI, the drivers for low-power mode are slew-rate controlled and current limited. The data rate in low-power mode is 10 Mbps. For a fixed clock frequency, the available data capacity of a PHY configuration can be increased by using more lanes. Effective data throughput can be reduced by employing burst mode communication. Mixel’s C-PHY/D-PHY combo is a complete PHY, silicon-proven at multiple foundries and multiple nodes. The C/D-PHY is fully integrated and has analog circuitry, digital, and synthesizable logic.
The Mixel MIPI D-PHY IP (MXL-DPHY) is a high-frequency low-power, low cost, source-synchronous, physical layer compliant with the MIPI® Alliance Standard for D-PHY. (Learn more about Mixel’s MIPI ecosystem at Mixel MIPI Central which gives you access to Mixel’s best of class MIPI ecosystem supply chain partners.) Although primarily used for connecting cameras and display devices to a core processor, this MIPI PHY can also be used for many other applications. It is used in a master-slave configuration, where high-speed signals have a low voltage swing, and low-power signals have large swing. High-speed functions are used for high-speed data traffic while low-power functions are mostly used for control. The D-PHY is partitioned into a Digital Module – CIL (Control and Interface Logic) and a Mixed Signal Module. It is provided as a combination of Soft IP views (RTL, and STA Constraints) for Digital Module, and Hard IP views (GDSII/CDL/LEF/LIB) for the Mixed Signal Module. This unique offering of Soft and Hard IP permits architectural design flexibility and seamless implementation in customer-specific design flow. The CIL module interfaces with the protocol layer and determines the global operation of the lane module. The interface between the D-PHY and the protocol is called the PHY-Protocol Interface (PPI). During normal operation, the data lane switches between low-power mode and high-speed mode. Bidirectional lanes can also switch communication direction. The change of operating mode or direction requires enabling and disabling certain electrical functions. These enable and disable events do not cause glitches on the lines that would otherwise result in detections of incorrect signal levels. Therefore, all mode and direction changes occur smoothly, ensuring proper detection of the line signals. Mixel’s D-PHY is a complete PHY, silicon-proven at multiple foundries and multiple nodes. This MIPI PHY is fully integrated and has analog circuitry, digital, and synthesizable logic. Our D-PHY is built to support the MIPI Camera Serial Interface (CSI) and Display Serial Interface (DSI) using the PHY Protocol Interface (PPI). Mixel has provided this IP in many different configurations to accommodate different applications. The Universal Lane configuration can be used to support any allowed use-case, while other configurations are optimized for many different use cases such as Transmit only, Receive only, DSI, CSI, TX+ and RX+. Both TX+ and RX+ configurations support full-speed loopback operation without the extra area associated with a universal lane configuration.
The ARINC 818 Product Suite is a comprehensive solution set designed to support the entire lifecycle of ARINC 818 enabled equipment. This suite offers tools and resources essential for developing, qualifying, testing, and simulating ARINC 818 products. It is recognized for its robust design and ability to address the complexities of high-performance avionics systems. Within the product suite, users can access the ARINC 818 Development Suite and Flyable Products, providing a framework for both development and in-field application. The suite is indispensable for organizations aiming to integrate ARINC 818 into their systems, ensuring precise data handling and compatibility. Great River Technology's experience in crafting over 100 mission-critical systems is embedded into the suite, offering unmatched expertise and dependability. By leveraging this suite, companies can ensure the reliable operation and seamless integration of ARINC 818 technologies.
The 3D Imaging Chip is designed to enhance the capabilities of devices requiring advanced 3D sensing and imaging technology. With an emphasis on precision, this chip supports a myriad of applications ranging from security and surveillance systems to autonomous machinery. It integrates seamlessly not only into varied machine vision systems but also into devices used in different fields that rely on accurate depth perception. This 3D imaging solution underscores Altek's commitment to producing high-performance technology that aids in intricate environment analysis and decision-making processes. This chip employs cutting-edge algorithms to improve the depth perception capabilities of devices, ensuring that it can operate effectively in diverse environments from short to long range. By integrating seamlessly into complex systems, this product strengthens overall functionality, making it an indispensable component in robotics and automated systems. Its robust capacity to handle various environmental conditions also highlights its versatility in usage across different industries. Moreover, this imaging technology is meticulously crafted to reduce energy consumption while maintaining high processing speeds, which are critical in time-sensitive and energy-conscious applications. The sophistication of this chip lies in its ability to combine high-resolution data capture with fast data processing, providing users with the assurance of accuracy and efficiency in real-time operational settings. This positions it as a pivotal development for industries looking to adopt smarter and more efficient technological solutions.
The HOTLink II Product Suite is engineered to deliver advanced capabilities in high-speed data and video link technologies. It serves as an essential toolset for developing and implementing HOTLink II protocols effectively, catering to the specific needs of modern avionics systems requiring reliable and high-throughput data transfer. This suite includes various components that enable the seamless transmission and conversion of data, supporting both development and operational phases. Its design incorporates technologies that enhance data integrity and efficiency, making it integral to systems where performance and reliability are critical. Great River Technology ensures that each component of the HOTLink II suite is crafted with precision, providing comprehensive support and simplifying integration processes. The suite redounds to the extensive expertise of Great River Technology in the sector, reinforcing their standing as providers of pioneering solutions.
Laser Triangulation Sensors are cutting-edge devices designed for precise non-contact measurement and position verification. These sensors are engineered to offer unmatched accuracy, operating within a range from 2 mm to 2.5 meters with a minimal measuring error of ±1 µm. They utilize both BLUE and IR laser bases, providing a sampling frequency of 160 kHz to ensure rapid and reliable data capture. The robust and versatile nature of these sensors makes them ideal for a wide range of industrial applications, offering superior performance in dynamic environments. The sensors are part of the RF603, RF602, RF603HS, RF600, RF605, RF609, and RF60i series. They are meticulously designed to function effectively in harsh industrial settings, maintaining efficiency and precision without physical contact. The Triangulation Sensors form an integral part of automation processes, where precise position checking and measuring are pivotal. Equipped with blue and infrared lasers, they offer high adaptability, allowing them to cater to various measurement needs across multiple disciplines. Whether for ensuring the correct positioning of components on assembly lines or verifying measurements within quality assurance processes, these sensors deliver reliable performance and adaptability.
CT25203 is an Analog Front-End IP core compliant with IEEE 802.3cg standard for 10BASE-T1S applications. It is part of Canova Tech's strategic offerings in analog domain, enhancing high-performance communication. The IP supports integral interoperability with digital PHYs, such as the CT25205, and is designed to operate with a high-voltage process technology, ensuring exceptional electromagnetic compatibility (EMC) performance. Its features facilitate reliable communication for industrial and automotive applications, proven in diverse environments.
The aLFA-C sensor represents a breakthrough in detection capabilities, specifically engineered for hyperspectral imaging applications. It is poised to meet the demanding needs of environments requiring high fidelity in capturing the full spectrum of light. This sensor is especially vital for tasks that involve detailed environmental monitoring and scientific data collection. The unique design of aLFA-C leverages CMOS technology to provide exceptional sensitivity across various wavelengths, making it adept at both visible and invisible spectrum recognition. It is equipped to deliver detailed and precise imaging for applications ranging from environmental science to advanced material inspections, thanks to its enhanced dynamic range and reduced noise features. With its adaptable design, aLFA-C enables users to customize settings for specific applications, allowing for the optimization of imaging results for diverse scientific inquiries. Its integration into hyperspectral instruments and infrastructures underlines Caeleste's commitment to offering cutting-edge solutions that form the backbone of sophisticated imaging systems worldwide.
The ADQ35 is a high-throughput digitizer designed for critical signal processing applications. Known for its 12-bit accuracy and high sampling rates, it stands out in delivering up to 10 GSPS, supporting single or dual-channel data streams. This ensures data integrity and speed for applications that demand precision and reliability, such as telecommunications and high-speed imaging. Equipped with enhanced processing capabilities, the ADQ35 ensures superior handling of complex datasets, making it suitable for scientific research and advanced electronics projects. Its robust design caters to the needs of modern digital systems, allowing for a seamless integration into existing infrastructure to facilitate expansive projects. This device also features streaming capabilities that provide a continuous flow of high-quality data, excelling in applications that require constant monitoring and data analysis. The ADQ35 digitizer is an excellent choice for industries that rely on swift and accurate data interpretation, enhancing overall system performance and technical output.
The Mixel MIPI M-PHY (MXL-MPHY) is a high-frequency low-power, Physical Layer IP that supports the MIPI® Alliance Standard for M-PHY. (Learn more about Mixel’s MIPI ecosystem at Mixel MIPI Central which gives you access to Mixel’s best of class MIPI ecosystem supply chain partners.) The IP can be used as a physical layer for many applications, connecting flash memory-based storage, cameras and RF subsystems, and for providing chip-to-chip inter-processor communications (IPC). It supports MIPI UniPro and JEDEC Universal Flash Storage (UFS) standard. By using efficient BURST mode operation with scalable speeds, significant power savings can be obtained. Selection of signal slew rate and amplitude allows reduction of EMI/RFI, while maintaining low bit error rates.
The MXL-LVDS-MIPI-RX is a high-frequency, low-power, low-cost, source-synchronous, Physical Layer that supports the MIPI® Alliance Standard for D-PHY and compatible with the TIA/EIA-644 LVDS standard. (Learn more about Mixel’s MIPI ecosystem at Mixel MIPI Central which gives you access to Mixel’s best of class MIPI ecosystem supply chain partners.) The IP is configured as a MIPI slave and consists of 5 lanes: 1 Clock lane and 4 data lanes, which make it suitable for display serial interface applications (DSI). The High-Speed signals have a low voltage swing, while Low-Power signals have large swing. High-Speed functions are used for High-Speed Data traffic while low power functions are mostly used for control.
The MXL-LVDS-DPHY-DSI-TX is a combo PHY that consists of a high-frequency low-power, low-cost, source-synchronous, Physical Layer supporting the MIPI® Alliance Standard for D-PHY and a high performance 4-channel LVDS Serializer implemented using digital CMOS technology. (Learn more about Mixel’s MIPI ecosystem at Mixel MIPI Central which gives you access to Mixel’s best of class MIPI ecosystem supply chain partners.) In LVDS mode, both the serial and parallel data are organized into 4 channels. The parallel data is 7 bits wide per channel. The input clock is 25MHz to 150MHz. The serializer is highly integrated and requires no external components. The circuit is designed in a modular fashion and desensitized to process variations. This facilitates process migration, and results in a robust design.
Advanced Silicon's Sensing Integrated Circuits are engineered for exceptional performance in diverse sensor systems, ranging from photo-diode based detectors to low-noise pixel arrays for photon detection. These ICs leverage multi-channel configurations with integrated per channel analog-to-digital conversion, providing superb noise specs, ADC linearity, and resolution. This makes them ideal for use in digital X-ray systems, CT and PET scanners, particle detectors, and even fingerprint detection solutions. By enhancing integration and performance while minimizing size and power consumption, these products empower highly efficient and advanced sensor applications.
The MXL4254A is a silicon proven Quad Gigabit SerDes implemented in digital CMOS technology. Each of the four channels supports data rate up to 4.25 Gbps. It is compatible with router-backplane links, PCI Express, SATA, RapidIO, 10 Gbps Ethernet (XAUI), FibreChannel, SFI-5, SPI-5, and other communication applications.
The MXL-SR-LVDS is a high performance 4-channel LVDS Serializer implemented using digital CMOS technology. Both the serial and parallel data are organized into four channels. The parallel data width is programmable, and the input clock is 25MHz to 165MHz. The Serializer is highly integrated and requires no external components. It employs optional pre-emphasis to enable transmission over a longer distance while achieving low BER. The circuit is designed in a modular fashion and desensitized to process variations. This facilitates process migration, and results in a robust design.
eSi-Analog integrates critical analog functionality into custom ASIC and SoC devices using leading foundry processes. It is optimized for low-power usage, ensuring efficiency and adaptability across a range of applications. This IP has been silicon-proven to meet custom specifications, providing reliability and performance in various high-demand sectors.
The Dynamic PhotoDetector (DPD) by ActLight specifically designed for smartphone applications marks a considerable advancement in mobile light sensing technology. This sensor is crafted with enhanced sensitivity and efficiency, capable of adjusting its operational parameters dynamically based on ambient light conditions. It ensures the optimum performance of smartphone features reliant on light sensing, such as automatic screen brightness adjustment and camera functionalities. Notably, the DPD achieves this while maintaining a lower power consumption profile than conventional alternatives, which is a significant advantage for today's power-hungry smartphones that demand long battery life. Its state-of-the-art design encapsulates high-performance metrics in a small, cost-effective package, allowing manufacturers to integrate it into devices without substantial adjustments in design and costs. This technology not only improves user experience by providing smoother, more responsive control over light-related smartphone features but also supports the burgeoning trend towards more eco-friendly, energy-efficient consumer electronics, reducing the overall energy footprint of modern mobile devices.
ELFIS2 is a cutting-edge sensor designed to meet the evolving requirements of space and scientific imaging applications. With its state-of-the-art architecture, the sensor is optimized for capturing high-resolution images in environments where precision and clarity are of utmost importance. It offers remarkable performance in capturing intricate details necessary for scientific exploration and research. This sensor is engineered with advanced features, including a high dynamic range and exceptional noise reduction capabilities, ensuring clarity and accuracy in every image captured. Such traits make it suitable for use in both terrestrial and extraterrestrial scientific endeavors, supporting studies that require detailed image analysis. ELFIS2 is perfectly suited for integration into scientific instruments, offering a robust solution that withstands the harsh conditions often encountered in space missions. Its adaptability and reliable performance make it an essential component for projects aiming to unlock new insights in scientific imaging, supporting endeavors from basic research to complex exploratory initiatives.
The MVWS4000 series encapsulates a trio of sensors in a single package, measuring humidity, pressure, and temperature. Crafted with sophisticated Silicon Carbide technology, these sensors are renowned for their accuracy and efficiency, presenting exceptionally fast sampling rates to serve precise, real-time environmental assessments. Designed for robustness, these units feature various grades of precision to accommodate different financial and operational requirements, ensuring high performance for sensitive applications. Their ultra-low energy needs and reliability position them as ideal candidates for OEM products and battery-powered devices. With their compact size yet comprehensive capabilities, the MVWS4000 series lends itself well to sectors including, but not limited to, industrial settings, the consumer marketplace, healthcare, and automotive systems.
ActLight's Dynamic PhotoDetector (DPD) for Smart Rings introduces a new dimension of light sensitivity tailored to the intricacies of ring-sized wearable technology. This innovation focuses on maximal efficiency and minimal size, offering wearers enhanced interaction and monitoring capabilities through improved light detection. Perfectly suited for devices requiring continuous power management, the DPD allows smart rings to maintain functionality over extended periods without draining their compact power sources. The sensor’s ability to adjust dynamically to ambient lighting conditions also enhances its utility in diverse environments, providing accurate readings no matter the surrounding light conditions. This feature is particularly beneficial for applications in fitness and health tracking, where accurate data collection is paramount. Additionally, integrating seamlessly into a ring form factor, the DPD supports the creation of elegant, minimalist designs that consumers in the smart jewelry market seek. The DPD technology presents an ideal solution for smart rings that need to deliver robust functionality, efficient power usage, and exquisite design all in one, ultimately enabling makers to craft next-generation smart jewelry that pushes the boundaries of what's possible in wearables.
The MXL-DS-LVDS is a high performance 4-channel LVDS Deserializer implemented using digital CMOS technology. Both the serial and parallel data are organized into four channels. The parallel data can be 7 or 10 bits wide per channel. The input clock is 25MHz to 165MHz. The De-serializer is highly integrated and requires no external components. Great care was taken to insure matching between the Data and Clock channels to maximize the deserializer margin. The circuit is designed in a modular fashion and desensitized to process variations. This facilitates process migration, and results in a robust design.
Certus Semiconductor's Analog I/O offerings bring ultra-low capacitance and robust ESD protection to the forefront. These solutions are crafted to handle extreme voltage conditions while securing signal integrity by minimizing impedance mismatches. Key features include integrated ESD and power clamps, support for broad RF frequencies, and the ability to handle signal swings below ground. Ideal for high-speed RF applications, these Analog I/Os provide superior protection and performance, aligning with the most demanding circuit requirements.
Enosemi's analog and mixed-signal devices are designed to handle both low and high-speed electrical signals, making them integral to the implementation and operation of advanced photonic circuits. These devices play a crucial role in ensuring signal integrity and seamless integration between various components within a circuit, facilitating high-fidelity data processing and transmission. The product range includes various amplifiers, filters, and converters, each meticulously crafted to enhance performance while minimizing power consumption and signal distortion. By leveraging these devices, engineers can achieve precise control over electrical signals, enabling the efficient operation of complex photonic systems. These devices are particularly well-suited for high-performance applications where accuracy and speed are paramount. By providing reliable and versatile solutions, Enosemi ensures that its products meet the highest standards required for next-generation photonic applications, aiding clients in achieving superior performance and reliability in their designs.
The ZIA ISP is a specialized image signal processing core aimed at enhancing camera systems by optimizing image quality and recognition accuracy, even in challenging conditions. Supporting the Sony IMX390 sensor, the ZIA ISP manages high dynamic range (HDR) and dynamic range compression (DRC), ensuring clear and accurate image capture in low light and adverse weather conditions. The ISP provides an array of parametric controls, including defective pixel correction, scaling, gamma correction, automatic white balance, and gain control. Such comprehensive control allows for high fidelity image preprocessing, crucial for systems requiring precise image recognition and management. Integrated into vehicle-mounted systems, DMP’s ZIA ISP, in conjunction with the IMX390 camera module, ensures consistent performance across full-HD sensor support. By maximizing the IMX390's HDR features, it offers superior object recognition and vision capabilities vital for high safety management systems.
Enosemi's photonic subsystems are integral to the development of advanced optical circuits, providing comprehensive solutions that integrate multiple optical components into cohesive systems. These subsystems facilitate efficient light signal modulation, amplification, and conversion necessary for complex optical networking tasks. By utilizing validated designs and comprehensive testing methodologies, these subsystems offer high reliability and performance. They support a wide array of applications, from high-capacity data transmission networks to intricate photonic processing systems, enabling groundbreaking advancements in optical circuit technology. The subsystems are crafted to meet diverse client needs, offering customization options to suit specific application requirements. This flexibility ensures that clients can leverage the latest photonic technologies to optimize their systems and achieve superior operational efficiency and effectiveness.
The AFX010x Product Family by SCALINX is a leading-edge range of Analog Front Ends designed for both benchtop and portable data-acquisition systems. These AFEs offer up to four channels, each with up to a 16-bit resolution and a high sampling rate reaching 5 GSps. Additionally, they come with a digitally-selectable 3dB bandwidth, which can range up to 300MHz, and feature an integrated single-to-differential amplifier and offset DAC. These AFEs are known for their low power consumption and high signal integrity. This makes them suitable for high sampling rate and wide bandwidth requirements, ensuring a high level of integration. The package includes programmable input capacitance, a programmable gain amplifier (PGA), an offset DAC, an ADC, and a digital processor within each channel, all within a standard 12mm × 12mm, 196-Ball BGA. The AFX010x family uses SCALINX’s proprietary SCCORE™ technology, which reduces the PCB footprint and cuts power consumption by up to 50%. This results in products that are pin-to-pin compatible across different AFX010x variants, providing users with flexibility in terms of power modes and performance configurations.
Kamaten's Telecommunication ADC is an 8-bit asynchronous analog-to-digital converter designed to meet the demands of modern telecommunication systems. It enables the conversion of analog signals into digital form at a high data throughput, supporting up to 1.2 Gbps. This ADC is particularly optimized for telecommunication applications that require rapid data acquisition and processing. The ADC utilizes TSMC’s 28HPC technology, offering a high level of integration with modern digital and mixed-signal systems. Its asynchronous nature allows the converter to operate efficiently without relying on a clock signal, making it a flexible solution for variable-rate data acquisition scenarios where adaptability to different signal conditions is critical. With its architecture designed to minimize latency and enhance signal integrity, the Telecommunication ADC is suitable for a wide range of applications beyond telecom, including data acquisition systems in industrial and consumer electronics. Offering a compact solution with high reliability, this ADC is an essential tool for engineers requiring precise analog-to-digital conversion capabilities.
ParkerVision's Energy Sampling Technology is a state-of-the-art solution in RF receiver design. It focuses on achieving high sensitivity and dynamic range by implementing energy sampling techniques. This technology is critical for modern wireless communication systems, allowing devices to maintain optimal signal reception while consuming less power. Its advanced sampling methods enable superior performance in diverse applications, making it a preferred choice for enabling efficient wireless connectivity. The energy sampling technology is rooted in ParkerVision's expertise in matched filter concepts. By applying these concepts, the technology enhances the modulation flexibility of RF systems, thereby expanding its utility across a wide range of wireless devices. This capability not only supports devices in maintaining consistent connectivity but also extends their battery life due to its low energy requirements. Overall, ParkerVision's energy sampling technology is a testament to their innovative approach in RF solutions. It stands as an integral part of their portfolio, addressing the industry's demand for high-performance and energy-efficient wireless technology solutions.
Tailored for hearables, the Dynamic PhotoDetector (DPD) from ActLight offers significant improvements in ambient light detection crucial for enhancing user experiences in audio devices. The DPD is designed with a focus on low power consumption, ensuring extended use without frequent battery charges, which is a critical feature for earbuds and other in-ear devices. This technology facilitates the creation of adaptive audio environments by accurately responding to light variations, ultimately leveling up the performance of any audio-centric wearable technology. Its miniaturized profile combined with high sensitivity paves the way for more compact and efficient hearable designs, allowing manufacturers to build devices that are as aesthetically pleasing as they are functional.
SiGe BiCMOS technology is tailored for RF applications, delivering excellent performance for high-frequency communications. This technology supports low noise figures and high linearity, vital for advanced communication systems. In the growing landscape of RF solutions, this process technology allows for enhanced integration and miniaturization of components, driving innovations in wireless communication. High precision transistors in this technology facilitate the development of superior RF transceivers, suitable for complex and demanding applications. It's well-suited for use in infrastructure systems where robust and reliable RF signal processing is crucial. By integrating both bipolar and CMOS transistors, this platform offers the best of both worlds, combining high-speed performance with power efficiency. Designed for versatility, the SiGe BiCMOS technology simplifies the design of RF circuits by allowing adaptability in circuit design and process options. This feature is particularly beneficial for designers working on next-generation wireless devices, pushing boundaries in speed and functionality.
This RF front-end design is essential for satellite reception, particularly in beam-forming applications. Operating within the Ku band (11-13 GHz), this design supports phased array systems, providing critical advancements for satellite communications. The primary focus is on enhancing the satellite's ability to effectively receive and transmit signals. The design leverages advanced RF circuitry to manage signal reception with high precision and minimal loss, making it especially valuable in environments requiring robust and reliable communications infrastructure. By optimizing the beam-forming capabilities, this technology ensures that satellite systems can handle complex signal scenarios efficiently. Through intricate engineering, the front-end module incorporates state-of-the-art processing nodes and electronic configurations that fine-tune the satellite's ability to steer and focus beams accurately. This capability is integral for applications requiring dynamic signal management, such as real-time communication and global positioning services.
The Dynamic PhotoDetector (DPD) for Wearables by ActLight embodies a revolution in light sensing technology specifically catered to the wearable tech market. This cutting-edge sensor is engineered to deliver enhanced precision by detecting even the tiniest light changes, which facilitates more accurate data collection for health monitoring devices and smart wearables. Its power efficiency is unmatched, operating at a fraction of the power used by traditional sensors, making it an ideal choice for battery-sensitive applications. The DPD technology ensures both high sensitivity and low power consumption, providing a significant advantage in maintaining the longevity and efficacy of wearable devices. Furthermore, its compact design allows for seamless integration into the most minimalist and modern wearable product designs without compromising performance.
The Heimdall platform is engineered for applications requiring low-resolution image processing and quick interpretation. It integrates image signal processing capabilities into a compact design, perfect for IoT applications where space and power consumption are constraints. The platform supports various image-related tasks including object detection and movement tracking. With a core image sensor of 64x64 pixels, Heimdall is optimized for environments where minor details are less critical. This makes it ideal for motion sensing, smart lighting, and automation systems where the understanding of space occupancy or movement is essential. The platform's energy-efficient design, capable of integrating energy-harvesting technology, ensures sustainable operation in remote and hard-to-reach locations. By providing rapid image interpretation, Heimdall supports quick decision-making processes crucial for smart infrastructure and security applications.
The ADQ7DC high-throughput digitizer is equipped with an impressive 14-bit resolution and can achieve speeds up to 10 GSPS. Catering to both single and dual-channel configurations, this digitizer supports a wide range of high-performance applications requiring rapid and precise data processing and acquisition. Its robust architecture ensures seamless operation, whether in research-focused environments or advanced technological applications like telecommunications. The precision and speed of the ADQ7DC make it a cornerstone for projects that rely on high-frequency data measurements and comprehensive signal analysis. Moreover, the digitizer's quality input range, reaching up to 3 GHz, equips it to manage signals effectively, maintaining integrity and performance under diverse conditions. This adaptability extends to various fields, supporting signal analysis efforts across numerous research and development initiatives.
The ADQ35-WB is a high-performance RF digitizer engineered to capture and process RF signals with unprecedented precision. It boasts a remarkable sampling rate that can reach up to 10 GSPS, and is capable of streaming data at an impressive 14 Gbyte/s. This digitizer is adept at handling single or dual-channel configurations, making it versatile for a range of applications that demand high fidelity and speed. Designed to facilitate pulse detection, it features a 12-bit resolution that is optimized to deliver the equivalent of 16-bit Effective Number Of Bits (ENOB). The ADQ35-WB’s design accommodates rigorous signal processing tasks, ensuring high-speed acquisition without compromising on quality. This makes it an ideal candidate for usage in applications like wide-band signal analysis, where both accuracy and speed are critical. With its sophisticated signal processing capabilities, the ADQ35-WB enables smoother digital performance enhancement. It supports a range of applications in fields such as research, telecommunications, and electronic warfare, attesting to its versatility and robustness in managing complex signal environments.
Global Unichip's Mixed-Signal Front-End is designed to accommodate the intricate needs of sophisticated analog signal processing applications. This IP is essential for converting between digital and analog signals seamlessly, ensuring precise communication and functionality in mixed-signal environments. It includes key components like ADCs and DACs that are critical for maintaining signal integrity across various systems. The IP is optimized for flexibility, enabling seamless integration with various systems and facilitating robust communication between analog and digital components. Its design supports diverse applications, from consumer electronics to high-end computing systems, providing essential functionality in environments where precise analog-to-digital conversion is paramount. Moreover, the Mixed-Signal Front-End is crafted to enhance performance while keeping power consumption in check, essential for modern portable devices and high-efficiency systems. This front-end solution is ideal for industries that require advanced signal processing capabilities, ensuring that GUC's offering remains a high-value component in their technology stacks.
Certus Semiconductor's RF/Analog solutions encompass state-of-the-art ultra-low power wireless front-end technologies. These include silicon-proven RF IPs, full-chip RF products, and next-generation wireless IPs. The RF IPs are compatible with various process nodes, offering comprehensive transceiver solutions integrated with digital controls and modern power management strategies. Specialized for wireless applications, these products include transceivers for LTE, Wifi, GNSS, and Zigbee, each meticulously designed to enhance communication reliability and efficiency in any technology node, from 12nm to 65nm processes.
The SMS Fully Integrated Gigabit Ethernet & Fibre Channel Transceiver Core is an advanced solution designed for high-speed data transmission applications. This core incorporates all necessary high-speed serial link blocks, such as high-speed drivers and PLL architectures, which enable precise clock recovery and signal synchronization.\n\nThe transceiver core is compliant with IEEE 802.3z for Gigabit Ethernet and is also compatible with Fibre Channel standards, ensuring robust performance across a variety of network settings. It features an inherently full-duplex operation, providing simultaneous bidirectional data paths through its 10-bit controller interface. This enhances communication efficiency and overall data throughput.\n\nParticularly suited for networks requiring low jitter and high-speed operation, this transceiver includes proprietary technology for superior jitter performance and noise immunity. Its implementation in low-cost, low-power CMOS further provides a cost-effective and energy-efficient solution for high-speed networking requirements.
These interface conditioners are designed to work with industrial sensors that use Wheatstone bridges, amplifying and processing their minute differential voltages for subsequent digital transmission. Granite SemiCom's design integrates advanced features such as digital signal transmission over an I2C interface and easy programming and debugging capabilities. Ideal for remote or distributed sensor systems, these conditioners support various configurations that enhance communication security and data integrity across potentially vast distances.
The ADQ35-PDRX is a single-channel 12-bit digitizer optimized for applications requiring precise pulse detection. This device, reaching up to 5 GSPS in sampling rate, is designed to provide a flexible solution for applications with specific and demanding data acquisition needs. With its 12-bit architecture, the ADQ35-PDRX offers a near 16-bit ENOB performance, which ensures high accuracy in detecting and measuring signals. This makes it highly suitable for applications like radar systems and scientific instrumentation where precise signal conversion is essential. It stands out for its ability to handle dynamic ranges and fluctuating signal intensities effectively. The digitizer streamlines data capture processes, offering reliable and effective measurement capabilities that support a wide array of industry needs. Its compatibility with various data acquisition setups makes it a valuable tool for engineers and researchers working to advance technological boundaries in their respective fields.
Designed to meet the modern demands of RF communication systems, the ATEK367P4 is an analog phase shifter engineered to deliver precise control over phase alignment across a bandwidth of 2 to 4 GHz. It offers a comprehensive phase range of up to 375 degrees, which is crucial for tuning and calibrating signal paths in phased array antennas and other sophisticated signal processing systems. The ATEK367P4 is characterized by its minimal insertion loss of 3 dB, thereby ensuring maximum signal integrity and efficiency—a necessity for optimal system performance. Packaged in a 4x4 mm QFN casing, this phase shifter is designed to fit seamlessly into existing systems, offering an effective solution for both upgrading current infrastructure and developing new projects. Thanks to its robust and reliable design, the ATEK367P4 is adept for conditions requiring high accuracy and consistency, such as satellite communications and radar systems. This product underscores Atek Midas's expertise in crafting components that bear the reliability and precision essential for cutting-edge RF applications.
The EPC Gen2/ISO 18000-6 Analog Front End is an integral component for RFID systems that require precise analog signal handling. This module is vital for the analog signal processing tasks mandated by the EPC Gen2 protocol, and it bridges the gap between digital logic and the analog environment inherent to RFID operations. It is crafted to offer superior performance through accurate signal conversion, noise reduction, and amplification where necessary. This ensures that the resultant signals are clean and reliable for subsequent processing by the digital back-end systems. Often deployed alongside digital protocol engines, the analog front end complements the system by preparing and optimizing the analog signals for smooth digital conversion and further processing. This front-end module is essential for systems operating under diverse environmental conditions and is perfect for applications in industries such as logistics, automated inventory management, and retail. With its adaptability, it ensures consistent performance, thereby enabling RFID systems to achieve high operational efficiencies.
The SlimPort DisplayPort to MIPI-DSI Controllers are designed for seamless integration in next-generation devices like AR/VR head-mounted displays. These controllers support impressive 4K resolutions at an ultra-high frame rate of 120FPS. With versatile DisplayPort and dual MIPI outputs, they ensure a wide range of compatibility, offering high-speed connectivity and superior display output for immersive and interactive experiences.
This versatile analog front end is designed to accommodate a voltage range of 1.8V to 5.0V, making it suitable for a variety of applications. It features low power consumption, making it ideal for battery-powered devices and applications where power efficiency is critical. The design ensures robust performance across its supported voltage range, providing reliable operation in both consumer and industrial electronics applications.
This broadband wireless microwave receiver front-end operates efficiently within the 10GHz to 15GHz frequency spectrum. It is a critical component for high-frequency communications, designed to enhance signal reception with minimal noise interference, thus ensuring clarity and reliability. With its advanced architecture, the receiver front-end optimizes signal sensitivity and selectivity, which are essential for handling complex signal environments often seen in broadband wireless and satellite communications. This ensures comprehensive coverage and robust performance necessary for modern communication systems. By integrating this receiver front-end, systems can achieve enhanced filtering and amplification of incoming signals, making it suitable for deployment in sophisticated telecommunication infrastructure. The design prioritizes both performance and efficiency, providing a foundational element for the development of next-generation wireless communication solutions.
It is comprised of a high resolution Mixed-signal Front-End and of a dense Power and energy Computation Engine to achieve at the system-level a class accuracy as high as 0.1% (class accuracy of the product is 0.05%) over a range up to 1/10,000.
It is comprised of a high resolution Mixed-signal Front-End and of a dense Power and energy Computation Engine to achieve at the system-level a class accuracy as high as 0.1% (class accuracy of the product is 0.05%) over a range up to 1/10,000.
It is comprised of a high resolution Mixed-signal Front-End and of a dense Power and energy Computation Engine to achieve at the system-level a class accuracy as high as 0.1% (class accuracy of the product is 0.05%) over a range up to 1/10,000.
It is comprised of a high resolution Mixed-signal Front-End and of a dense Power and energy Computation Engine to achieve at the system-level a class accuracy as high as 0.1% (class accuracy of the product is 0.05%) over a range up to 1/10,000.
Join the world's most advanced semiconductor IP marketplace!
It's free, and you'll get all the tools you need to discover IP, meet vendors and manage your IP workflow!
Join the world's most advanced AI-powered semiconductor IP marketplace!
It's free, and you'll get all the tools you need to advertise and discover semiconductor IP, keep up-to-date with the latest semiconductor news and more!
Plus we'll send you our free weekly report on the semiconductor industry and the latest IP launches!